Rather than trying to keep two separate Blogs active and updated, this Blog will be continued at my new location which is a part of my main Ross Coin Rings website.
The new location for all my Blog postings will be here.
Please stop by my new location and continue reading my Ross Coin Ring postings over there. Thanks a lot.
Showing posts with label Ross. Show all posts
Showing posts with label Ross. Show all posts
Thursday, March 19, 2015
Wednesday, March 11, 2015
What is the smallest size coin ring you have seen?
Quite frankly the smallest size coin rings you generally see are
those sized for a woman or a child. Many of those range from about a 2.5
to a 5 or 6. It is possible to fabricate a US Quarter down to a 5 or
6, but if you need a size smaller than that, I generally recommend
starting with a smaller coin - like a dime or a penny.
The other day I was wondering just how small I might be able to forge a coin ring, and still have it look fairly nice. I started with a US Dime (clad), and although I had to resort to using some special tools I do not generally use - I was able to produce a pretty nice coin ring that is "almost" a Size 0 (zero). It actually turned out to be a Size 1/4.
You can see it and many of the other coin rings I make, at my website and in my store. Stop by and check out all of my coin rings and leave me a comment if you so desire.

The other day I was wondering just how small I might be able to forge a coin ring, and still have it look fairly nice. I started with a US Dime (clad), and although I had to resort to using some special tools I do not generally use - I was able to produce a pretty nice coin ring that is "almost" a Size 0 (zero). It actually turned out to be a Size 1/4.
You can see it and many of the other coin rings I make, at my website and in my store. Stop by and check out all of my coin rings and leave me a comment if you so desire.

Sunday, February 22, 2015
Ross Coin Rings Gets a Facelift - Wow! Now that's a Makeover
After much research and some head-scratching, I decided to give the Ross Coin Rings website a general facelift and makeover. Check it out... and I hope it is an improvement.
Friday, February 20, 2015
An Interesting Silver Coin Ring for the Size 10 finger
Today, I added a new silver coin ring to my store on Ross Coin Rings.
This beautiful ring was forged from a US 1943 Walking Liberty Half
Dollar. It is a size 10 and as you can see is finished with an antique
look to capture all the fine engraving that is so much a part of these
iconic old US coins. The details were preserved both inside and out.
When you are asked by others to see the ring, you can proudly show them
the original engraving on both sides of your ring.
Stop by my Ross Coin Rings store often as I am always adding new items. At this time, shipping is FREE.
Stop by my Ross Coin Rings store often as I am always adding new items. At this time, shipping is FREE.
Wednesday, February 18, 2015
Ross Coin Rings Now For Sale on Site... and free Shipping
Hopefully, this change will make it more convenient for visitors to browse and purchase rings from my inventory. Check back often as I also have plans to expand the current inventory.
Sunday, February 1, 2015
Why is this called The Gamblers Coin Ring?
The Morgan Silver Dollar, regardless of the year, is a well-known
icon of US coinage. This beautiful coin is 90% silver and when made
into a coin ring, results in a very massive and attention-getting piece
of jewelry. Sometimes known as a "gamblers ring", the large ring is
always noticed by others and is said to bring the wearer good luck. I am currently running some actual tests on this theory.
When crafting this particular coin ring, I took special time and care to form it into a unique one-of-a-kind piece of jewelry. I make these rings on custom order only, and in sizes from 13 to 18. If you are interested in having me make one for you, please contact me and I will quote you a price and fabrication time.
When crafting this particular coin ring, I took special time and care to form it into a unique one-of-a-kind piece of jewelry. I make these rings on custom order only, and in sizes from 13 to 18. If you are interested in having me make one for you, please contact me and I will quote you a price and fabrication time.
Wednesday, January 28, 2015
When I sit down to work, I mean business
My bench is where I craft all of the Ross Coin Rings. Some of the hand-tools I use were designed by me and are used during certain proprietary steps of the crafting process. Here is a recent picture of me where I am checking the inside diameter of a finished ring with my dial calipers.Sizing is important for a good fit, so I try to achieve the size ordered within a few thousandths of an inch.
Monday, January 12, 2015
Ross Coin Rings Logo
The logo serves as a symbol of the artistic craftsmanship and care that goes into every coin ring I produce. I fabricate my coin rings the old fashioned way with flame, forging, my special hand tools and artistic input. Time and patience produces beauty.
Look for this logo when you consider purchasing a coin ring for yourself or as a gift - and you can be sure it will become a precious heirloom for many generations.
Friday, January 2, 2015
1941 Washington Quarter Silver Coin Ring
December 7, 1941... a day that will live in infamy. Although this
particular US Quarter was a bit worn from all the years it was in
circulation; still I felt it was quite worthy of becoming a unique coin
ring. On that fateful day, Japanese planes attacked the United States
Naval Base at Pearl Harbor in Hawaii. The attack cost the US over 2300
brave souls, and will never be forgotten.
Imagine if this
particular coin may have been carried by someone who actually survived
the horrific attack. Certainly the date on this coin (1941), marks a
very significant
milestone in the history of the United States, and of World War II.
Now, as a coin ring, this 90% Silver Washington Quarter can be worn on your finger as a piece of history that can be handed down for generations to come.This coin ring is currently available for purchase from my Ross Coin Rings shop on Etsy.
Imagine if this
particular coin may have been carried by someone who actually survived
the horrific attack. Certainly the date on this coin (1941), marks a
very significant
milestone in the history of the United States, and of World War II.Now, as a coin ring, this 90% Silver Washington Quarter can be worn on your finger as a piece of history that can be handed down for generations to come.This coin ring is currently available for purchase from my Ross Coin Rings shop on Etsy.
Saturday, December 20, 2014
Bicentennial Half Dollar Coin Ring
As I annealed and formed this Kennedy Bicentennial Half Dollar into a
beautiful coin ring, I could not help but admire the engraving of the
original coin. A true double-sided coin ring, where the details of the
original coin remain visible both inside and outside the coin is unique
today. Only a scant few coin ring makers know how to create a real
double-sided artistic piece. This 1776-1976 US Kennedy Half Dollar is a
size 10, and would make a great gift for the man who appreciates a
unique coin ring specimen. This ring is currently available from my Etsy shop, as well as several others.
Saturday, November 8, 2014
Coin Ring Men's Size 11
Here is a coin ring I made from a clad New Hampshire US Quarter. I
custom fabricated this ring to a size 11, which is about the largest
size possible from a US Quarter. The band is fairly narrow and makes a
beautiful ring. Details on both the outside and the inside have been
preserved as I carefully crafted this ring. Check out my Ross Coin Rings website, or my Etsy Shop for more of my custom made coin rings.
Sunday, November 2, 2014
Tennessee Statehood Coin Ring
Handcrafting a US Statehood Quarter into a beautiful coin ring requires fire, artistic dexterity and some special hand tools. You can read more about the coin rings I create on my Google+ page and my Twitter page. To purchase one of my rings visit Ross Coin Rings.
Labels:
artistic,
coin,
coin rings,
ring,
rings,
Ross,
State Quarter,
US
Thursday, October 23, 2014
Coin Ring for Your Toe
Toe rings are very popular with those who like to wear sandals and open
toed shoes. This old silver Roosevelt dime was handcrafted into a
wonderful size 3 toe ring. The small opening in the bottom of the ring
allows the wearer to open it slightly and then close it to just the
right fit. Check out all the unique coin rings available from the Ross Coin Rings website, or the Ross Coin Rings Etsy shop.
Saturday, October 18, 2014
Ross Coin Rings Available on Etsy
In the last couple of weeks I have been putting some of my coin rings up on my Etsy shop. My rings are now available from two locations; Ross Coin Rings and the Ross Coin Rings Etsy shop. Stop by either one and let me know if you have a special request, or perhaps you will like one of the rings already made up and in stock. They make great gifts and remember they can always be worn on a small chain as a necklace.
Thursday, October 16, 2014
How To Make Double-Sided Coin Rings - #5
Next comes the fun part. You can put down your hammer and mandrel and start finishing the now fully shaped coin ring.
There are at least two ways you can finish inside and outside surfaces of the ring. Generally, the annealing process will leave a certain amount of colored residue on the outside surface of the coin. Depending on what the base metal is, the color of this "jewelers scale" will range from dark grey (almost black) to a lighter range of grey or possibly a brown color. In either case, you may finish the coin so that much of the background retains the darker color; or alternatively you can choose to polish the entire surface to a mirror finish. The choice is yours.
If you leave a lot of the color in the background of the coin, the details of the original engraving will be more prominent. To acheive this finish you need to first lightly sand only the tops of the highlights with a very fine grit sand paper or emery paper. Then apply some metal polish to the ring and polish until the highlights and edges are quite shiny and prominent. This leaves the background darker.
Alternatively if you want to go for the mirror finish; use a fine steel wool and polish the entire surface of the coin, thereby removing much of the background color as well as polishing the highlights. Then apply some metal polish and buff the ring until it reaches a mirror finish. One of the most popular metal polish products is called Mothers Mag & Aluminum Polish. It is usually available anywhere auto supplies are sold.
The details on the inside of the coin ring may be finished in the same manner as those on the outside of the coin.
There is also something known as a Jewelers Polishing Cloth. This cloth is actually a two-part item where one half of the cloth is impregnated with a metal polish, while the other half is merely a buffing cloth. The shine of any ring can be restored with this type of cloth.
This completes this series of postings. Bear in mind, I have iterated only the very basic steps and most coin ring craftsmen will use them as a start and then modify and alter them to form their own techniques and methods.
Also, there are several good videos on YouTube that describe this basic process or some form of it. I would recommend if you are just starting, to watch one or more of the available videos. Here are a couple that will get you started. My coin rings are available at Ross Coin Rings or Ross Coin Rings Etsy Shop
There are at least two ways you can finish inside and outside surfaces of the ring. Generally, the annealing process will leave a certain amount of colored residue on the outside surface of the coin. Depending on what the base metal is, the color of this "jewelers scale" will range from dark grey (almost black) to a lighter range of grey or possibly a brown color. In either case, you may finish the coin so that much of the background retains the darker color; or alternatively you can choose to polish the entire surface to a mirror finish. The choice is yours.
If you leave a lot of the color in the background of the coin, the details of the original engraving will be more prominent. To acheive this finish you need to first lightly sand only the tops of the highlights with a very fine grit sand paper or emery paper. Then apply some metal polish to the ring and polish until the highlights and edges are quite shiny and prominent. This leaves the background darker.
Alternatively if you want to go for the mirror finish; use a fine steel wool and polish the entire surface of the coin, thereby removing much of the background color as well as polishing the highlights. Then apply some metal polish and buff the ring until it reaches a mirror finish. One of the most popular metal polish products is called Mothers Mag & Aluminum Polish. It is usually available anywhere auto supplies are sold.
The details on the inside of the coin ring may be finished in the same manner as those on the outside of the coin.
There is also something known as a Jewelers Polishing Cloth. This cloth is actually a two-part item where one half of the cloth is impregnated with a metal polish, while the other half is merely a buffing cloth. The shine of any ring can be restored with this type of cloth.
This completes this series of postings. Bear in mind, I have iterated only the very basic steps and most coin ring craftsmen will use them as a start and then modify and alter them to form their own techniques and methods.
Also, there are several good videos on YouTube that describe this basic process or some form of it. I would recommend if you are just starting, to watch one or more of the available videos. Here are a couple that will get you started. My coin rings are available at Ross Coin Rings or Ross Coin Rings Etsy Shop
Saturday, September 27, 2014
Newly Revised Shop Page
Although I have a good variety of my in-stock coin rings listed, there are still a few that are not listed yet. I'm working on completing this page. In the meantime, if you want something that is not listed yet, contact me by Email and I will let you know if I have it on hand or could make it for you.
Wednesday, September 24, 2014
Nevada US State Quarter Coin Ring
This US State Quarter commemorating Nevada statehood in the year 1864 was recently transformed by me into this beautiful coin ring. Although it appears large in the photos, this coin ring was purposely crafted to be a Size 4, thereby giving me the opportunity to exhibit large portions of the elegant engraving embodied on the surface of this particular coin.

This ring is currently available for immediate shipment from my website at Ross Coin Rings, and even if it is too small to fit your finger, it could always be put on a small chain and worn as a
stylish pendant.

This ring is currently available for immediate shipment from my website at Ross Coin Rings, and even if it is too small to fit your finger, it could always be put on a small chain and worn as a
stylish pendant. Sunday, September 21, 2014
Not All Coin Rings Are Quality Products
It is interesting to me when I see so many "wanna-be" coin ring makers attempting to peddle their initial products to the public. Seems just about every hobbyist that views the typical YouTube instructional video decides they will capitalize on the hobby by quickly hammering out a ring and selling it on eBay. Unfortunately, it is really not that simple to produce a quality piece of jewelry that will exhibit the true mark of an artistic craftsman.
Here is just one example (picture) of what I am talking about. The typical hobbyist, armed only with a plastic hammer, a ring mandrel and a flat file, can generally hammer the edges of a quarter over the tapered mandrel in a matter of a few minutes. Then they file some of the sharp corners with a rasp file and Presto! their ring is ready for the auction block on eBay. This is hardly the work of a true artistic craftsman; and it definitely shows.
Of all the many coin ring makers today, there are really only a very few artistic craftsmen that take pride in the time and effort that goes into each piece they create. In addition the recipient/customer can easily appreciate the work that resulted in a beautiful and elegant piece of handcrafted jewelry, and themselves are proud to wear and show it off.
Certainly, a handsomely crafted coin ring requires a wide range of hand tools; not just a hammer, a mandrel and a file. But more importantly, a quality crafted coin ring is really the culmination of a great deal of time and experience, not just a tool set. The time expended in order to hone artistic skills is usually measured in years, not minutes or days. Of course natural talent plays an important role in the development of any artistic endeavor. For me personally, my interest in expressing myself artistically started to emerge when I was in grade school. And, looking back over all the intervening years, the bulk of my endeavors centered around crafts and hobbies involving some form of artistic expression.
Each coin ring I produce involves a great deal of time and concentration because it must first satisfy my own high standards for quality, beauty and elegance. Only then am I confident that it will be representative as a coin ring crafted by me... Ross of Ross Coin Rings.
Here is just one example (picture) of what I am talking about. The typical hobbyist, armed only with a plastic hammer, a ring mandrel and a flat file, can generally hammer the edges of a quarter over the tapered mandrel in a matter of a few minutes. Then they file some of the sharp corners with a rasp file and Presto! their ring is ready for the auction block on eBay. This is hardly the work of a true artistic craftsman; and it definitely shows.Of all the many coin ring makers today, there are really only a very few artistic craftsmen that take pride in the time and effort that goes into each piece they create. In addition the recipient/customer can easily appreciate the work that resulted in a beautiful and elegant piece of handcrafted jewelry, and themselves are proud to wear and show it off.
Certainly, a handsomely crafted coin ring requires a wide range of hand tools; not just a hammer, a mandrel and a file. But more importantly, a quality crafted coin ring is really the culmination of a great deal of time and experience, not just a tool set. The time expended in order to hone artistic skills is usually measured in years, not minutes or days. Of course natural talent plays an important role in the development of any artistic endeavor. For me personally, my interest in expressing myself artistically started to emerge when I was in grade school. And, looking back over all the intervening years, the bulk of my endeavors centered around crafts and hobbies involving some form of artistic expression.
Each coin ring I produce involves a great deal of time and concentration because it must first satisfy my own high standards for quality, beauty and elegance. Only then am I confident that it will be representative as a coin ring crafted by me... Ross of Ross Coin Rings.
Wednesday, September 10, 2014
Ross Coin Rings Website Now Online
With that chore out of the way, now I can get back to actually making more coin rings, and building up the stock on-hand.
I want to thank everyone that have recently shown an interest in my coin rings, including those I spoke with yesterday at breakfast. If you will visit my website, you will find the latest photographs of some of my rings, as well as an opportunity to contact me with what you are interested in.
Friday, September 5, 2014
New Website Construction
Labels:
coin,
ring,
rings,
Ross,
State Quarter,
wheat back
Subscribe to:
Posts (Atom)
































