Showing posts with label make. Show all posts
Showing posts with label make. Show all posts

Saturday, February 21, 2015

Ever wonder How Coin Rings Are Made?

Jewelry, in the form of rings, have been made from coins for many decades; probably even centuries. You can read more about the history of coin rings here.

Double-sided coin rings have really come along a bit more recently. They get their name from the fact that the coin is forged (or manipulated) in such a way, so as to preserve the details of the coin engraving from both sides of the coin, as well as the "factory" outside edge. A good example  is shown here.

As is true of many crafts, or artistic endeavors; the process of creating a coin ring may range from the simplest of techniques - requiring only a few basic tools, to rather elaborate fabrication methods that involve a wide range of precise and specific jewelry making tools.  Some of the more complex methods involve not only special hand-made tools, but the methods themselves may be proprietary in nature.

Naturally, the end products from these very diverse methods reflect the amount of time, skill, experience and resources that were applied to crafting the specific coin rings. In most all cases, this fact is very evident just from the appearance of the final piece.

In order to gain some first hand knowledge about how a fine coin ring is made, I have compiled a set of instructional videos that were recently released by a single skilled coin ring maker. His name is Skyler Jenkins and his shop name is The Mint - Change You Can Wear. Although these videos go into a fair amount of detail, they really represent a good beginning. Generally, an accomplished coin ring maker will devote many hours of trial and error work before gaining all the necessary nuances of fine coin ring making.

Nevertheless, if you will watch one or more of these videos, I think you will begin to get an appreciation for the amount of time, skill and tools that are necessary to turn out a beautiful coin ring. To get a look at these videos, please sign up here and ask for the link.

Tuesday, December 2, 2014

Not All Coin Rings Crafted the Same


When shopping for a beautiful custom made coin ring, be sure to evaluate and choose the coin ring craftsman with care. Not all coin rings are made the same. Some are hurriedly folded over a simple slanted side mandrel and end up looking more like a Cone-Ring than an elegant coin ring.
Essentially, the maker stopped the forming process before it was completed. Perhaps they were in a hurry to polish it up and get it sold.

It takes extra time, some special hand tools and a unique technique in order to actually create a coin ring that is not only eye-catching, but also a thing of beauty.
When you purchase a Ross Coin Ring, you can be sure you are getting a coin ring that reflects hours of artistic effort - not only in crafting each item, but also in perfecting an old-school technique that uses no short-cuts or automated machinery.

Friday, October 10, 2014

How To Make Double-Sided Coin Rings - #2

The entire basic concept of creating a double-sided coin ring revolves around starting with a flat object (a coin), and transforming it to a circular ring shaped object. The transformation will result in the features on one side of the coin to be visible on the outside of the ring band; while the features on the other side of the coin are visible on the inside of the ring.  Refer to the picture here as an example.

There are four basic steps to achieve this transformation from coin to ring. They are listed below:
  • Removing some metal from the center of the coin
  • Softening the metal (annealing)
  • Shaping or forming the metal
  • Finishing and polishing
Each of the four steps above, involve certain basic tools in order to complete the process.  The following list represents the minimum set of tools. It should be noted that although each coin ring craftsman start out with this minimum set of tools; as they gain experience, develop and refine their own techniques and methods, generally they will add other tools to suit their own needs.

The basic set of tools involve the following:
  • A metal punch or drill (or both)
  • Small propane torch
  • Small selection of metal files, ie. rat-tail, flat mill bastard
  • A nylon, leather or plastic hammer
  • A hardened steel tapered mandrel
  • Two or three different grits of sand paper and some steel wool
  • Metal polish and/or metal polishing cloth
In the next part of this instructional material, I will cover how these basic tools are used to create a coin ring.


Wednesday, October 8, 2014

How To Make Double-Sided Coin Rings - #1

Just to be sure everyone understands the term "double-sided", it will next be defined. Coin rings have been fabricated for literally decades previous to this current flurry of interest. But it is only recently that the technique known as "double-sided" has gained in popularity. Probably the last 10 or 12 years.

Rather than repeat what I have already written on this subject, I would refer to a page that is located on my Ross Coin Rings website.  If you will click on this link, it will open a specific page on my website, that talks briefly about the history surrounding the making of coin rings.

In essence then, a "double-sided" coin ring refers to a ring made from some type (or denomination) of coinage, whereby details of the original coin engraving are visible both on the outside of the band as well as the inside of the band. It should be pointed out that some "makers" tend to ignore the details on the inside of the band, and usually destroy most if not all of them because of their methods of fabrication. In those instances, the inside of the band ends up perfectly smooth or nearly smooth, leaving only the details on the outside of the band to be visible.  Of course these examples could not rightfully be considered double-sided, according to the above definition.

I should mention there is one other type of ring that is termed as a "coin ring", and these consist of the entire coin being attached to or set in the top of a ring mounting. In these rings, the coin is not damaged or changed in shape, but it is merely captured and set into the top bezel of a manufactured ring.

The next part of this discussion will begin to describe how to get started, if you are interested in trying to make a coin ring for yourself or as a gift to someone. There are certain basic tools that you will need to obtain, and you will need to learn certain basic procedures.

Monday, October 6, 2014

How To Make Double-Sided Coin Rings - Intro

Making coin rings out of ordinary currency, be it US or foreign coinage, is becoming a very popular hobby. However, only a scant handful of all these fabricators could actually be considered artisan craftsmen (and women).

Probably you will not be able to completely learn this craft just by reading about it. Nevertheless, for those who really have no idea where to start - perhaps I can give you a good start by sharing some basic information.

This first posting is merely my introduction to the information I will be sharing. In order to keep these postings from becoming excessively long; I will try to cover only one facet of the process in each posting.  Stop back often to read all of the postings and thus gain the knowledge to get started making your own coin rings.  Each posting will have the phrase "How To Make Double-Sided Coin Rings" in the title.  That way you can keep track of what you have read, and recognize when I have added something new.